How to assemble a PC?
Watch the video
If you want to acquire a new personalcomputer, then the finished system unit can be bought without problems in the store. However, you can build a fairly powerful PC by yourself. This will allow you to save a little, and also make the computer solely for your requests. About the selection of details for the computer you can read in our section Accessories. And now we will briefly consider how to assemble a PC.
- First, you need to fix the processor tomotherboard. Be sure to check the symbols on the microcircuits. Only then fix the board on the case (most often on the left side). It will connect to it all the necessary components.
- Then you need to install the power supply. It is located at the bottom or top of the case, depending on the configuration. Connect the wire from the PSU to the motherboard, then fix the wire to the wall of the case, if there are special hooks for this. If not, fix it with screeds.
- Next, you can connect a video card,memory. They are attached directly to the motherboard. Only after these manipulations go to the front panel. On it, you need to connect the power and reset buttons, and also attach the optical drive, the card reader (if necessary). The hard disk is also attached to the front panel, from the inside. Fasten it to special slots, then power off. At the very end, install coolers. Their number can vary from 2 to 4, depending on the power of the PC. Be sure to check the correct installation of the fans to ensure that cooling is effective. Before the first startup, be sure to carefully check the assembly so that there are no excess or loose wires in the system unit.
In our article How to assemble a computer by yourself you can read in detail how to assemble a PC.