How to remove the head Epson?
During the continuous operation of Epson inkjet printers, various printing problems can occur: quality deterioration, line drift, and so on. To eliminate such problems, it is almost always necessary to remove the print head of the printer. But how to remove the head Epson, so as not to damage it?
So, the reason for the removal may be the appearance of blots on paper during printing. In the case of blots on black, you will need to check the rest of the colors. If everything is fine with them, you will have to carefully and carefully remove the print head from the printer and rinse it.
To remove the head, you need to find and unscrew the screws that are located on the back of the device. Then gently remove the cover on the sides of the printer. To do this, you need to gently pry the latch, using a long thin screwdriver that passes through the printer.
Before removing the Epson printhead, you need to remove the paper holding device.For this, on the paper holder, you need to press a little and move it to the right or left. Now you can remove the device, unscrew the screw and pry the latches in front and behind. Then lift the case and disconnect the cable that is connected to the printer's control panel.
When the housing is removed, you can begin to remove the carriage cover. To do this, you need to lift the holder, unscrew the screw and carefully remove the cover. Thin loops that can be seen can not be removed. Now the question arises: how to remove the Epson printer head? The print head rests on two screws, which will need to be unscrewed inside the carriage. It is necessary to remove the head very carefully so as not to touch the fittings that supply ink, it is better not to touch them with your hands.
After completing all of these steps, you must remove the print head from your Epson printer for subsequent flushing. During the execution of the removal, you must remember the sequence of actions performed and carefully put all the details in a box so as not to lose. If this is not done, serious problems can arise during the installation of the head and the printer assembly.