Particleboard: what is it and how to work with it

Particleboard is a material that is used in construction and in finishing works and is environmentally friendly. This abbreviation stands for "chipboard".

what is this?

Kinds

There are two types of such material: ground and laminated chipboard. Their difference lies in the fact that the ground is produced without coating, and the laminated is covered with a melamine film.

Basic properties

When the answer to the question is: "Particleboard - what is it?", And its types are considered, you can go to the properties of this material. Its most basic advantage is considered to be low cost and the possibility of performing a sufficiently rapid processing. Operational properties directly depend on the shape, density, size, as well as on the qualitative and quantitative characteristics of this material. To ensure a more reliable stability of the chipboard when exposed to fire, it is treated with flame retardants.

dsp it

Benefits

The main advantage of this constructionmaterial is considered sufficiently easy to process. With proper use it can serve several decades. Quality chipboard - what is it? It is a material that has excellent strength, high density and elasticity. Wood-particle boards are used in construction works, as this material is light enough, economical and multifunctional. The presence of a special impregnation provides high water and fire-resistant properties of the material. In addition, there are no knots, cracks, voids on the surface of the chipboard, and thanks to this the material easily keeps nails and screws.

Application area

Thanks to reliable quality and lowThe cost of chipboard is widely used in construction, with decorative decoration of premises, in the manufacture of furniture. Laminated chipboard is used in the manufacture of sets for the kitchen, bedroom, children's room, office and office. When carrying out construction work, it is taken for the production of decking under the roof and floor coverings.

Working with chipboard

When working with this material, you need to know the properties of the chipboard, what is it and its main characteristics.

laminated chipboard

Sawing the chipboard is necessary unhurriedly. It is advisable to use a saw with small teeth, then the line along which the cut is made, will not crumble and break. If a laminated chipboard is sawn, it is necessary to stick an adhesive tape on its surface, thereby protecting it from damage. Drilling material is necessary smoothly, using a sharp drill, which should work at high speed. In this case, you need to make sure that the drill is perpendicular to the surface, or else a chip may occur.

To remove all irregularities, apply the plane andrasp. The tool must be moved from the outside to the inside. In this work, it is important to prevent the extraction of chips, therefore, the edge will become much more accurate. If there is such a need, then you can use the file.
Laminated chipboard does not need processingsurface, it is enough just to process the edges. The rest of the untreated surfaces can be varnished, painted with paint or glued with a film. Before the surface is coated, the slabs must be plastered.

In this article, the question: "DSP - what is it?" - you got a clear and detailed answer.



Related news

Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it Particleboard: what is it and how to work with it